2" Eye Lag Screws for Metal – 750 SD Self-Drilling I-Lag™ for 16–22 Gauge Sheet Metal

2 inch Eye Lag Screws

The 2 inch Eye Lag Screwsl (750 SD) are purpose-built for anchoring into 16–22 gauge sheet metal, making them ideal for overhead support in commercial and industrial settings. These self-drilling I-Lag™ screws are the only ones of their kind to carry an ICC-ES listing, confirming their reliability and performance under code-compliant standards.

Whether you're hanging ceiling wire, jack chain, or structural bracing, this screw provides fast, consistent results. The 750 SD’s drill point penetrates cleanly without pre-drilling, while the ¾″ collar-to-point distance and 2″ overall length ensure a tight, flush fit. Designed to be used with the Lagmaster® Plus pole tool, it allows safe installation directly from the ground, no ladders required.

Why 2 inch Eye Lag Screws Are Ideal for Overhead Installations

For installers working with 16–22 gauge sheet metal, speed and safety are top priorities. The 2" eye lag screws deliver on both fronts. The sharp tip and aggressive threads make direct installation into sheet metal effortless, eliminating the need for pre-drilling and saving valuable time on-site.

The compatibility with the Lagmaster® Plus tool system turns this fastener into a ladder-free solution. Professionals can hang ceiling grid wire or jack chain quickly and safely from the ground. It’s a trusted choice for suspended ceilings, lighting installs, and duct support, especially when compliance, consistency, and safety can’t be compromised.

Key Features of 2 inch Eye Lag Screws

The 750 SD I-Lag™ features a ¼″–14BSD thread and measures approximately 2″ in total length, with ¾″ from drill tip to collar. These specs allow for a secure grip in light-gauge steel without over-penetrating or compromising material strength.

Its zinc-plated finish resists corrosion in HVAC zones or damp ceiling spaces. The open-eye design allows for quick wire pre-tying, increasing installation speed. As the only ICC-ES listed fastener of its kind, it’s certified for reliable overhead use and frequently used in suspended ceiling and overhead drilling and anchoring systems.

Compatible Materials and Real-World Uses for 2 inch Eye Lag Screws

These eye lag screws are built specifically for 16–22 gauge sheet metal, the standard in many commercial ceilings and steel-framed interiors. They’re ideal for applications where structural consistency is crucial, such as hospitals, schools, retail stores, and office fit-outs.

Common uses include suspending light fixtures, installing seismic bracing, supporting conduit trays, or anchoring acoustical tile grids. When paired with fasteners like purlin clips, threaded rod fasteners, or angle clips, the 750 SD forms part of a complete, code-compliant ceiling mounting solution.

Choosing the Right Eye Lag Screws for Your Project

If your project involves overhead installations in steel joists or sheet metal frames, selecting the right fastener makes all the difference. The 2 inch eye lag screws combine tested strength, ICC-certified reliability, and installation speed into one product. Their compatibility with pole tools helps reduce jobsite hazards while maintaining professional standards.

With consistent performance and versatile applications, these screws are a trusted go-to for contractors, electricians, and ceiling grid installers who rely on fast, secure setups in demanding environments.

Need Help Choosing the Right 2 inch Eye Lag Screws?

If you're working with 16–22 gauge sheet metal and need a fast, secure anchor for ceiling wire or jack chain, these 2 inch I-Lag™ screws are a dependable choice. As the only ICC-ES listed self-drilling eye lag screw on the market, they’re engineered for professional use with the Lagmaster® Plus tool. For help with bulk orders or matching the right fastener to your installation, our team is ready to assist. Just reach out, and we’ll get you sorted.