HPHACPA J-Hook with Concrete Anchor - High Performance Wide Base J-Hook with 90° angle clip and 1-5/16" Simpson Strong-tie® pin for concrete by Doc's Industries Inc.

The HPHACPA J-Hook Cable Support combines a strong metal backbone with a plastic cable-bearing component for overhead network pathways. Hook and Hanger distributes this hybrid hardware for overhead network work. It supports organized cable management above commercial work areas while helping crews route sensitive communications cable without exposing the jacket to metal burrs.

These components provide optimum support for high-speed data cables, including Cat 5e, Cat 6, Cat 6A, Cat 7, and fiber optic cable. Each unit provides a heavy-duty structural anchor that is UL listed, TIA compliant, Plenum-rated, and assembled in the USA with global components. We supply multiple sizes for matching pathway capacity to the specified cable count and ceiling layout.

What Is the HPHACPA J-Hook Cable Support Used For?

The hardware creates a dedicated pathway for communications cabling routed beneath structural ceilings and above finished spaces. Its pre-configured angle clip assembly speeds support-point installation while protecting high-speed cable.

• A 2-inch-wide plastic base forms a slick, burr-free bearing surface over the strong metal backbone, limiting concentrated pressure and abrasion against cable jackets.

• The built-in snap-lock retainer closes the support without clumsy retainer wires or cable ties, reducing loose components and simplifying cable additions during installation.

• An industry-leading 3.57-inch average bend radius supports smooth cable transitions and helps protect Cat 6A, Cat 7, and fiber optic lines from sharp directional changes.

• The open pathway remains accessible for cable placement, inspection, adjustment, and future network changes.

What Are the HPHACPA J-Hook Cable Support Specifications?

Each size has a 20 lb. UL load rating, while capacity varies by support size. Select hardware according to approved drawings, cable type, load, fill, and installation requirements.

• HPH16ACPA: 1-inch size; 20 lb. UL load rating; supports 20 Cat 5e, 15 Cat 6, or 10 Cat 6A cables.

• HPH32ACPA: 2-inch size; 20 lb. UL load rating; supports 90 Cat 5e, 60 Cat 6, or 35 Cat 6A cables.

• HPH48ACPA: 3-inch size; 20 lb. UL load rating; supports 200 Cat 5e, 150 Cat 6, or 80 Cat 6A cables.

• HPH64ACPA: 4-inch size; 20 lb. UL load rating; supports 330 Cat 5e, 220 Cat 6, or 140 Cat 6A cables.

• Compliance and construction: UL and cULus listed, RoHS compliant, TIA compliant, and Plenum-rated for use in applicable air-handling spaces.

• Color and assembly options: available in blue, red, and black; assembled in the USA with global components.

Use these counts to compare models while accounting for project specifications, cable manufacturer instructions, pathway fill, support spacing, and local code requirements. Hook and Hanger can help identify the correct size for a planned cable schedule or material submittal.

How Does the HPHACPA J-Hook Cable Support Attach to Overhead Structure?

The pre-configured bracket assembly uses metal angle hardware for direct overhead attachment. It joins the cable-bearing component to the structure without a separate retainer around the pathway. The rigid backbone carries the supported load, while the plastic base separates data cable from exposed metal contact points.

Alongside standard overhead drilling and anchoring operations, the hybrid assembly provides a fast, secure installation path. Coordinate the unit with beam clamps, angle clips, and threaded rod fasteners used in complex commercial ceiling grids. The attachment method must match the substrate, approved load, structural conditions, and project documentation.

At elevated attachment points, compatible extension poles can help crews place selected hardware from floor level where approved. Confirm spacing and pathway alignment before loading the support, then verify that each snap-lock retainer is engaged and the cable rests evenly across the base.

Why Use HPHACPA J-Hook Cable Supports in Plenum Spaces?

Air-handling areas above a suspended ceiling require components specified for that environment. The Plenum-rated profile supports use within applicable return-air spaces. RoHS compliance addresses restricted substances, while TIA compliance aligns the pathway with recognized structured cabling requirements. UL and cULus listings support submittal review and inspection.

The slick plastic surface and 3.57-inch average bend radius support routing around ducts, utilities, and ceiling systems. The retainer contains the cable, while the metal backbone provides strength for organized overhead routing. The HPHACPA J-Hook Cable Support protects cable geometry while remaining accessible for field work.

Different structural conditions may require other hardware. We also supply purlin clips for compatible metal framing, j-hooks for common low-voltage pathways, and eye lag screws for approved wood attachments. These options help contractors coordinate with the substrate, ceiling configuration, cable volume, and installation plan.

Order HPHACPA Cable Supports From Hook and Hanger

Choosing Hook and Hanger means equipping your construction crews with dependable, code-compliant overhead support parts designed to perform on demanding jobsites. By integrating the exact engineering, high-tensile structure, and advanced material compatibility of this specific support system into your project plans, you secure an efficient, hassle-free installation backed by a specialist team focused entirely on practical hardware solutions.

To purchase your HPHACPA J-Hook Cable Support inventory or to explore our complete selection of alternative purlin clips, beam clamps, eye lag screws, and threaded rod fasteners, visit hookandhanger.com today. For technical support, bulk pricing tiers, or submittal documentation, call our specialist team at 805-583-9920 or email info@hookandhanger.com.