ASC14 Z Purlin Clip for Angled Steel Flange Support

At Hook and Hanger, we supply the ASC14 purlin clip for overhead support work that requires a secure attachment point on angled structural steel. This heavy-duty component provides installation crews with a dependable solution for establishing vertical drop locations directly beneath pitched or sloped roof structures. By anchoring safely to structural members without requiring specialized drilling setups, it significantly improves task repetition during large-scale commercial build-outs and optimized cable management installations.

This high-performance spring steel part clamps firmly onto a diagonal flange rather than requiring installers to drill a new hole through the structural member. The formed profile provides a direct suspension point for ceiling wire or jack chain, helping crews establish controlled drops for cabling pathways and light overhead support layouts. This configuration ensures a reliable anchor point while preserving the structural integrity of the overhead steel framework.

What Is the ASC14 Z Purlin Clip Used For?

The ASC14 purlin clip is used to create a hanging point from diagonal beam flanges with a thickness between 1/8 inch and 1/4 inch. Its spring steel construction grips the flange by spring force, so the connection can be made without standard drilling into the supported member. This method is useful where the approved support layout allows a clip-on attachment. The integrated 1/4-inch hole is positioned for ceiling wire or jack chain, allowing an installer to form a vertical drop from the overhead framework.

For suspended ceiling installations, an ASC14 purlin clip can support wire drops that help establish a level grid beneath pitched or diagonal structural conditions. It may also be used where utility wire is being routed from a suitable overhead point, provided the application, loading, wire size, and support spacing meet the project documents and applicable codes. The clip is not a substitute for reviewing the structure or the required load path. Before installation, confirm that the flange thickness, member condition, intended attachment, and suspension method match the approved design.

ASC14 Z Purlin Clip Specifications

• Spring steel construction for clip-on engagement with an angled steel flange.

• Designed to accommodate diagonal beam flanges from 1/8 inch to 1/4 inch thick.

• Integrated 1/4-inch hole for hanging ceiling wire or jack chain.

• RoHS-compliant construction for projects that require an eco-friendly hardware option.

• A practical alternative to other purlin clips when the specified connection point is on an angled flange, and the installation method calls for a spring steel clip.

Compatible Installation Tooling and System Integration for the ASC14 Purlin Clip

An ASC14 purlin clip is compatible with specialized pole-based installation methods where crews need to set the clip from ground level. The Doc's® HOIT-S installation adapter provides the dedicated interface for attachment to a compatible pole tool, allowing the installer to guide the clip into position without relying on a ladder for every location. Confirm tooling before work begins, particularly where height, obstructions, or access controls affect the installation sequence.

• Doc's® HOIT-S installation adapter for ground-level pole tool attachment.

• Compatible extension poles used to reach the intended overhead flange from the floor.

• Ceiling wire or jack chain is routed through the integrated 1/4-inch hole for the suspended drop.

• J-hooks are installed as separate, complementary components where supported cable pathways require purpose-built cable retention.

• Overhead drilling and anchoring tools and methods for locations that require an engineered drilled attachment rather than a clip-on connection.

• Beam clamps for other structural members where the flange orientation, thickness, or connection design differs from the angled application served by this clip.

• Angle clips and threaded rod fasteners for separate ceiling, framing, or support details specified elsewhere in the same overhead layout.

• Eye lag screws only for approved wood-framing connections; they are not a substitute for a spring steel connection on structural steel.

Benefits of ASC14 for Contractors and Ceiling Installation Crews

The ASC14 purlin clip gives crews a direct method of forming a wire or chain drop from a qualifying angled flange. Instead of marking, drilling, and cleaning a hole in the structural member, the installer positions the clip at the approved location and engages it with the spring steel profile. This can reduce repeated work on layouts with many overhead suspension points, while also limiting the use of drilling equipment where a clip-on method is specified. The 1/4-inch hole keeps the wire or jack chain attachment point consistent from one drop to the next.

For a ceiling crew, the ASC14 purlin clip supports organized installation planning. The team can verify each flange, place clips, and complete wire drops before moving to grid components or cable support accessories. When paired with the right tooling, the method can also reduce ladder-dependent work during the clip-placement stage. Site supervisors should still set the work sequence around fall protection, lift requirements, local regulations, and the project’s approved overhead support plan.

The ASC14 purlin clip should be selected only when its flange range and intended use match the job specification. A contractor or engineer must determine the permitted load, spacing, and suitability for the assembly; these factors are not established by the presence of a mounting hole alone. Do not modify the clip, force it onto an oversized flange, or use it in place of an attachment method required by the design professional. Careful selection helps maintain a clear support path from the suspended item back to the structural member.

We stock ASC14 purlin clip inventory for contractors managing ceiling work, utility support installations, and phased construction schedules. Hook and Hanger supports nationwide shipping, bulk jobsite releases, and organized distribution for crews that need hardware delivered with related overhead components. Our team can help purchasers identify the relevant item, compare compatible installation accessories, and request product documentation before material is released to the jobsite.

Order the ASC14 Z Purlin Clip at Hook and Hanger

Choosing Hook and Hanger means equipping your construction crews with dependable, code-compliant overhead support parts designed to perform on demanding jobsites. By integrating the spring steel construction, angled flange compatibility, and integrated hanging point of this specific clip into your project plans, you support an efficient installation process backed by a specialist team focused on practical hardware solutions.

To purchase your ASC14 purlin clip inventory or to explore our complete selection of alternative purlin clips, beam clamps, eye lag screws, and threaded rod fasteners, visit hookandhanger.com today. For technical support, bulk-order support, or submittal documentation, call our specialist team at 805-583-9920 or email info@hookandhanger.com.