Wood Screw Bridle Ring – 1.25" Diameter – BR4T125WS for Voice, Signal, and Control Cable Support

Why the Wood Screw Bridle Ring – 1.25 – BR4T125WS Is Ideal for Overhead Cable Installations

When you’re routing voice, data, or control cables through wood framing, the Wood Screw Bridle Ring – 1.25 – BR4T125WS offers a simple, reliable solution. Designed for fast installation into wood surfaces, this zinc-plated bridle ring secures wiring with minimal hardware while keeping cable bundles neat and well-supported.

It’s especially useful in open-ceiling environments, light commercial spaces, and telecom infrastructure builds. The 1.25-inch diameter ring provides ample clearance for typical low-voltage bundles, and its integrated wood screw allows for direct-to-joist mounting without the need for additional brackets or anchors.

Common Job Site Uses for the Wood Screw Bridle Ring – 1.25 – BR4T125WS

The Wood Screw Bridle Ring – 1.25 – BR4T125WS is widely used in structured cabling projects involving CAT5/CAT6, coaxial, or alarm wires. You’ll find it installed in IT closets, utility rooms, drop ceilings, and retrofit environments. It’s a favourite among contractors due to its quick set-up and ability to maintain organised cable runs along beams, trusses, or joists.

This bridle ring is also commonly paired with cable management tools, eye lag screws to help create a complete wire support system. Whether you're handling data installations or routing signal lines in finished or unfinished interiors, this clip is built for efficiency.

Material Specs and Cable Compatibility of the Wood Screw Bridle Ring – 1.25 – BR4T125WS

The Wood Screw Bridle Ring – 1.25 – BR4T125WS is made from zinc-plated steel, offering light-duty corrosion protection for indoor applications. The 1.25” ring provides generous spacing for most low-voltage cabling, while the wood screw threads ensure a firm grip in framing lumber when installed with a pre-drilled pilot hole.

This ring is ideal for light-to-medium cable loads and is typically installed with basic hand tools or overhead drilling and anchoring equipment. The open-ring format helps maintain a safe bend radius for communication cables and prevents signal degradation caused by sharp corners or pinch points.

Real-World Applications of the Wood Screw Bridle Ring – 1.25 – BR4T125WS

On-site, the Wood Screw Bridle Ring – 1.25 – BR4T125WS is used wherever wire routing needs to be secure, tidy, and non-intrusive. It’s common in overhead runs above ceiling tiles, inside utility closets, or along open walls in low-traffic areas. Its simple, open-loop design allows for easy cable threading and adjustments after installation.

Whether in commercial fit-outs, maintenance upgrades, or structured cabling rollouts, it helps streamline your setup while reducing material clutter and installation time.

Choosing the Right Wood Screw Bridle Ring for Your Project

If you're routing data or signal lines through wood structures and want to keep things simple, the Wood Screw Bridle Ring – 1.25 – BR4T125WS is a highly effective solution. Its zinc-plated finish, integrated wood-thread shank, and large ring diameter make it a practical choice for fast, code-friendly cable organisation.

Whether you're outfitting a network closet or laying out cable paths in a new build, this bridle ring helps maintain safe, efficient routing with minimal hardware and maximum flexibility.

Need Help with Wood Screw Bridle Rings or Bulk Orders?

We stock the Wood Screw Bridle Ring – 1.25 – BR4T125WS in contractor-sized quantities, ideal for larger installation projects or ongoing cabling work.