HOCL-5 90 Degree Angle Clip by Doc's Industries Inc.

Rigid single-hole clips can turn an overhead layout into rework. When a ceiling line, deck point, or utility path is off by a fraction of an inch, installers may have to back out screws and drill new pilot holes.

Hook and Hanger supplies the HOCL-5 90 Degree Angle Clip for contractors who need a compact, zinc-plated 90° utility attachment with practical adjustment built in. We stock this lightweight clip for interior jobs where acoustic ceiling wires, low-voltage paths, and utility drops must stay aligned.

The HOCL-5 is a 90-degree angle clip with parallel adjustment slots, dedicated small guide holes, and a squared bend. Our Angle Clips selection gives crews a fast way to position light-duty bracing, tie wire, and compact utility attachments.

Industrial Overhead Fastening with the HOCL-5 90 Degree Angle Clip

Field conditions rarely match drawings perfectly. Deck surfaces vary, light-gauge track can shift, and long ceiling runs often need corrections to keep wire drops linear. The slot layout gives installers controlled movement before final tightening, helping them compensate without restarting the fastening point.

That adjustment matters when this hardware is set into overhead track, light framing, or ceiling support points. Hook and Hanger also supports related installation work with Overhead Drilling & Anchoring solutions for setting pins, screws, and anchors through overhead materials. This helps reduce substrate damage and speed repetitive layouts.

In a Suspended Ceiling installation, small alignment errors can affect wire plumb, grid squareness, and final visual quality. The HOCL-5 gives crews a practical correction point at the bracket itself, helping keep lightweight cabling grids and acoustic layouts straight and serviceable.

Designed for Tight Spaces and Drop Rods

The physical footprint of this bracket is one of its biggest field advantages. Its slim, elongated geometry nests neatly against light-gauge metal track, wall angles, and compact ceiling framing points. The corner notch-relief helps it sit cleanly where a bulkier bracket may bind or push the connection out of square.

The bracket is useful where low-profile utility drops must stay close to the deck or ceiling structure. The small body reduces congestion in plenums carrying conduit, cable trays, HVAC elements, sprinkler lines, and low-voltage pathways. For Cable Management layouts, that compact size gives installers a dependable anchor point without crowding the service space.

Hole Layout and Technical Specifications for the HOCL-5 90 Degree Angle Clip

Here are the key physical details that make this clip practical for high-volume commercial installation:

• Core Material Composition: Crafted from commercial-grade carbon steel treated with premium zinc plating for strong indoor durability and corrosion resistance in standard interior environments.

• Material Thickness: Formed with a lightweight, easily managed 18-gauge steel profile that helps reduce dead weight in dense overhead configurations.

• Physical Component Dimensions: Features accurate overall dimensions of approximately 2" x 2" x 7/8", giving installers a useful surface area for light-duty connections.

• Precision Small Guide Holes: Stamped with circular anchoring and routing holes measuring approximately 1/8" in diameter, making them suitable for fine wire ties or specialized pins.

• Integrated Adjustment Slots: Includes matching parallel guide slots measuring approximately 1/8" in width to support tracking adjustments and fastener positioning.

• Packaging Data: Distributed in standard commercial boxes of 100 units with an ultra-light box weight of just 4 lbs for simple handling on ladders, lifts, and job carts.

Common Uses for the HOCL-5 90 Degree Angle Clip

This product is best suited for light-duty interior support points where speed and adjustability matter more than heavy structural load capacity. Acoustic ceiling installers can use it for tying off commercial ceiling wire and keeping grid support points aligned. Low-voltage subcontractors can use the clip to support security line paths, data drops, sensor wiring, and utility routing points.

MEP specialists also use this clip for secondary bracing wire, light fixture coordination, and utility layout support. Because the bracket has both slots and small holes, crews can position fasteners or route fine wire without forcing one rigid layout.

The lightweight profile also fits overhead pole-based workflows. Hook and Hanger supplies Extension Poles for installers who need to reduce ladder movement and speed overhead fastening. When cable pathways continue beyond the clip location, our J-Hooks category gives crews an adjacent containment option for organized overhead utilities.

Main Advantages of the HOCL-5 90 Degree Angle Clip on the Job

• Elongated 1/8" slots provide excellent lateral play. Installers can adjust alignments quickly without drilling extra holes or weakening the mounting surface with repeated corrections.

• Lightweight 18-gauge body keeps fatigue low. The clip is easy to handle in high-volume overhead work while still maintaining the squared shape needed for tidy light-duty utility layouts.

• Small-diameter 1/8" holes create snug tie points. These holes help prevent unnecessary sliding when crews work with ceiling wire, light bracing wire, or specialized small pins.

• Factory-squared 90-degree bend supports vertical drops. The bracket helps protect light-duty layouts from twisting stress when the installation depends on clean plumb alignment.

Complete Your Project Package with Hook and Hanger

This product is a small component, but it plays an important role in project consistency. Purchasing teams can source it alongside structural assembly packages, reducing supplier fragmentation and improving material hand-offs.

Standardizing on the correct clip also helps reduce submittal delays, material confusion, and field substitutions. Hook and Hanger supports volume ordering, organized product selection, and direct shipping.

Order Your HOCL-5 90 Degree Angle Clip Inventory Directly From Hook and Hanger

Partnering directly with Hook and Hanger gives your team commercial-grade hardware support from a supplier that understands high-volume project logistics, timelines, and zero-fail material reliability. We work with the trade every day, so our support is focused on practical field use, fast ordering, and dependable jobsite readiness.

To purchase your HOCL-5 inventory or to explore our complete selection of Angle Clips, Beam Clamps, and Threaded Rod Fasteners, visit hookandhanger.com today. For technical support, bulk pricing tiers, or submittal documentation, call our specialist team at 805-583-9920 or email info@hookandhanger.com.