FRACP 90° Angle Clip with 1/4″ x 20 Threaded Female Eye Coupling and Powder Actuated Pin for Concrete by Doc's Industries Inc. (100 pack)

The FRACP 90° Angle Clip is a concrete attachment component for installers who need a rigid mounting point above the work area. It combines a 90-degree metal angle clip, a 1/4" x 20 threaded female eye coupling, and an integrated powder-actuated pin for overhead support. Hook and Hanger supplies this component for commercial cable management layouts that require code-compliant support from concrete substrates.

This hardware is designed for heavy-duty structural anchoring to concrete substrates, providing a rigid professional platform for assemblies. We stock it for contractors who need to suspend threaded rod, J-Hook runs, and other pathway hardware without relying on existing ceiling wire. The coupling accepts standard 1/4" x 20 rod, while the pin allows direct fastening into concrete.

What Is the FRACP 90° Angle Clip with Eye Coupling and Pin Used For?

The FRACP 90° Angle Clip is used where installers need a fast overhead attachment point for datacom support hardware, especially when building codes do not allow new pathway supports to be tied to previously installed ceiling wire above a suspended ceiling.

• Supports ground-level assembly of J-Hook and threaded rod setups before overhead fastening.

• Allows crews to fasten prepared assemblies to the ceiling in one fluid operation.

• Provides a concrete-mounted alternative when existing ceiling wire cannot carry new loads.

• Helps separate ceiling grid components from independent low-voltage support hardware.

• Works for datacom pathways, overhead cable routes, and commercial interiors requiring rigid mounting points.

What Are the FRACP 90° Angle Clip with Eye Coupling and Pin Specifications?

The FRACP 90° Angle Clip is specified for direct concrete fastening and 1/4" x 20 rod compatibility. Its integrated design keeps the angle clip, female eye coupling, and pin aligned.

• Product Code: FRACP

• Rod Compatibility: Accommodates all lengths of standard 1/4" x 20 threaded rod.

• Pin Dimensions: Powder-actuated pin size is 1" length x 0.157" diameter.

• Installation Compatibility: May be installed utilizing Doc's® Long Shooter pole systems.

• Construction Note: Rigid metal construction with an integrated 90-degree design for overhead support applications.

This specification is useful when the installer needs a compact attachment point already configured for threaded rod. Our hardware line supports field work where direct mounting and reliable component fit are important.

How Does the FRACP 90° Angle Clip with Eye Coupling and Pin Attach to Overhead Structure?

This clip attaches through its powder-actuated pin, which is driven into the concrete deck with compatible fastening. Standard powder-actuated tools can be used where access allows, while compatible long reach pole systems can help installers work from below. The 1" pin provides the direct connection, and the female eye coupling remains ready to receive the threaded rod.

For installers evaluating this component alongside standard overhead drilling and anchoring operations, the clip bypasses manual masonry bit work for a rapid, stable mount. That helps crews complete multiple overhead attachment points without slowing the pathway installation sequence. Hook and Hanger also supplies extension poles for long reach installation.

Some conditions call for beam clamps on exposed steel. Other areas may require angle clips for support from structural surfaces. The correct choice depends on the substrate, load path, and approved attachment method.

Why Use the FRACP 90° Angle Clip with Eye Coupling and Pin in Commercial Environments?

Commercial datacom work often requires fast installation without compromising code separation. In many interiors, installers cannot attach new cable pathway supports to existing ceiling grid wire. That restriction creates a need for concrete-mounted support parts that create independent overhead attachment points. This component answers that jobsite problem with a rigid metal platform and a powder-actuated pin for direct concrete attachment.

Pre-assembling components on the ground can improve jobsite safety and speed. Installers can attach threaded rod and j-hooks before lifting the assembly into position, reducing overhead handling. This is useful when repetitive support points must be placed across commercial interiors.

Hook and Hanger supplies supporting hardware for different mounting conditions, including purlin clips, eye lag screws, and threaded rod fasteners. We offer these alternatives because no single fastening method fits every overhead condition. A concrete deck, steel beam, wood member, purlin, and suspended grid environment each require the correct attachment method. This clip is most relevant where a concrete substrate is available, and a 1/4" x 20 threaded female eye coupling is required.

Order FRACP 90° Angle Clips with Eye Coupling and Pin From Hook and Hanger

Choosing Hook and Hanger means equipping your construction crews with dependable, code-compliant overhead support parts designed to perform on demanding jobsites. By integrating the exact engineering, high-tensile structure, and advanced material compatibility of this specific support system into your project plans, you secure an efficient, hassle-free installation backed by a specialist team focused entirely on practical hardware solutions.

To purchase your FRACP 90° Angle Clip inventory or to explore our complete selection of alternative purlin clips, beam clamps, eye lag screws, and threaded rod fasteners, visit hookandhanger.com today. For technical support, bulk pricing tiers, or submittal documentation, call our specialist team at 805-583-9920 or email info@hookandhanger.com.