HOCL-10 Offset Hanger Support Angle Clip by Doc's Industries Inc.

Running supports too close to flush decks, rough walls, or uneven framing can make overhead work harder than it needs to be. When hardware sits tight against the surface, wire bundles, conduit, piping, and ceiling support lines become difficult to place cleanly. Nails, roofing screws, or rough edges may also rub against the infrastructure after the job is closed in. Some crews bend regular straight clips by hand, but that wastes labor, weakens the part, and can leave a poor detail during inspection.

The HOCL-10 Offset Hanger Support Angle Clip gives your crew a cleaner answer. This offset hanger support angle clip creates an immediate 2-inch drop clearance gap, helping utilities sit safely away from the deck or wall surface. Hook and Hanger stocks it for commercial projects where repeatable placement, clean alignment, and dependable support are required. Stamped from tough 12-gauge steel and packed with pre-drilled holes, it arrives ready for placement on the jobsite. Each clean box includes 100 units, weighs 16 lbs per box, and helps purchasing teams stage hardware before installation begins.

Setting Up Steady Supports with the HOCL-10 Offset Hanger Support Angle Clip

A dedicated offset hanger support angle clip stops the problems that come from field-bent hardware. Instead of forcing a straight part to act like an offset bracket, your crew gets a fixed shape that holds its line under load.

We stock this 12-gauge steel support bracket for contractors who want strong placement without extra field work. In cable management applications, the fixed drop helps low-voltage wiring and communication lines stay clear of rough deck surfaces. For suspended ceiling projects, it can support overhead pathways while keeping the layout work repeatable. Hook and Hanger supplies this clip for safe, code-conscious installation without unnecessary bending on-site.

Designed for Simple Setup and Safe Clearance

The offset shape is the main value of this offset hanger support angle clip. Its drop-down leg creates clear space between the structure and the supported line, so wire, conduit, pipe, and other utilities are less exposed to contact points that may cause wear. It also links the building structure to support hardware without cutting, bending, or jobsite modification.

This layout works well with specialized installation lines like Doc's HPHTS, HPHRS, HPHTL, and HPHRL setups. Crews working around roof framing may use purlin clips where the structure calls for them, while installers can pair the offset support path with j-hooks to keep heavier bundles from sagging. For work above the ceiling line, overhead drilling and anchoring equipment, extension poles, and eye lag screws can help crews reach attachment points safely.

Dimensions and Product Specifications for the HOCL-10

Here are the key product details for planning, ordering, and jobsite staging:

• Tough Steel Thickness: Stamped from heavy-duty 12-gauge steel to keep its exact shape under load and prevent bending or flexing.

• Offset Drop-Down Leg: Built with a fixed 2" drop-down leg featuring two offset 1/4" holes for easy anchoring adjustments.

• Long Support Leg: Formed with a 3.5" long anchoring leg that carries three 21/64" holes spaced roughly 1" apart for versatile tool access.

• Compact Width Profile: Measures 1" wide at its widest point and narrows down to 3/4" wide to fit comfortably into tight framing spots.

• Protective Core Plating: Finished with eco-friendly, RoHS-compliant zinc plating for long-lasting wear inside commercial buildings.

• Jobsite Supply Packaging: Sold in convenient bulk boxes of 100 pieces, measuring 9.5" x 4.5" x 4", for easy storage and staging across the jobsite.

Common Ways to Use the HOCL-10 Offset Hanger Support Angle Clip on the Job

This clip works well in indoor commercial applications where the crew needs safe clearance without slowing down the install. Contractors can use this offset hanger support angle clip for low-voltage wiring pathways, conduit support, small pipe support, ceiling grid drops, and utility lines that must sit away from rough walls, beams, or tight deck surfaces.

Hook and Hanger also supplies this product for jobs where several hardware types must work together. Standard angle clips may handle direct attachment points, while beam clamps can help when fastening to structural steel is required. When a support line needs vertical adjustment, threaded rod fasteners can complete the connection with a stable finish. Using the correct clip helps crews reduce rework, avoid improvised bends, and keep the finished installation professional.

Advantages of Using the HOCL-10 Support Clip

These practical benefits make the part a strong choice for repeat commercial installs:

• Rugged 12-gauge structural steel completely eliminates sagging and keeps your overhead runs level.

• Fixed 2" drop layout provides immediate code-compliant clearance without wasting time on manual field modifications.

• Built-in choice of 1/4" and 21/64" pre-drilled holes fits a variety of fasteners like machine screws, concrete screws, wedge anchors, or #8 to #14 framing screws.

• Clean zinc plating ensures a rust-free, professional finish that easily passes building safety inspections.

Get All Your Installation Supplies under One Roof with Hook and Hanger

Ordering the right hardware together keeps the project moving. When clips, anchors, fasteners, and support parts are staged before installation, crews spend less time chasing missing materials and more time finishing the work. We supply the offset hanger support angle clip alongside the rest of your project hardware so purchasing teams can reduce paperwork, avoid split shipments, and keep each phase organized.

Get Your HOCL-10 Offset Hanger Support Angle Clip Supply Directly From Hook and Hanger

Hook and Hanger supplies tough, reliable hardware built for real, everyday jobsites. Choosing the exact sizing and dependable quality of this offset support clip means you get a fast, hassle-free installation backed by a supplier that understands the trade and focuses on helping your crew succeed.

To purchase your HOCL-10 inventory or to explore our complete selection of Angle Clips, Beam Clamps, and Threaded Rod Fasteners, visit hookandhanger.com today. For technical support, bulk pricing tiers, or submittal documentation, call our specialist team at 805-583-9920 or email info@hookandhanger.com.