DOC9030 90° Angle Clip w/ 1-1/16” X 0.157” Dia. Pin by Doc's Industries Inc.

Overhead fastening should not slow down a ceiling crew. When installers are working from a ladder, lift, or deck-level layout, handling a loose pin and a separate bracket can become awkward fast. Small parts get dropped, tools can jam, and uneven attachment points make ceiling wire layouts harder to control.

The DOC9030 gives contractors a cleaner way to handle that work. This 90° angle clip arrives with the 1-1/16” pin already assembled, so crews can load the hardware into powder-actuated or single-shot gas-actuated tools and shoot directly into concrete or steel. Hook and Hanger supplies it in project-ready boxes of 100 pieces, giving your crew a fast, secure, tool-driven attachment point right out of the box.

Optimizing Ceiling Wire Layouts with the DOC9030 90° Angle Clip

This 90° angle clip is made for high-production interior work where speed, repeatability, and clean alignment matter. Instead of stopping to match a loose pin with a loose bracket, installers can move across the deck with a ready-to-fire assembly. That helps reduce installation time and keeps wire drops more consistent from one bay to the next.

For suspended ceiling grids, the 1/4” hole accepts 12-gauge ceiling wire, giving installers a simple tie-off point for level, dependable support. It also supports light utility runs, secondary fasteners, and overhead layout points. Hook and Hanger keeps this hardware available for contractors who want fewer loose parts, cleaner staging, and smoother workflow on active jobsites.

The product also fits naturally into broader ceiling and service layouts. Crews working on cable management paths can use it alongside other hanging products to keep low-voltage routes neat and secure.

Pre-Assembled Pin Engineering for Tool-Driven Efficiency

The main advantage of the DOC9030 is its pre-assembled design. The pin is already seated with the clip, so installers do not need to handle two separate components while working overhead. That is a practical benefit when the crew is moving quickly across concrete slabs, structural steel, or metal deck conditions.

The 90° angle clip shape creates a clean side-facing opening for wire or compatible fasteners, while the fixed pin gives the tool a ready fastening point. With powder-actuated or single-shot gas-actuated tools, crews can position, fire, and move to the next location with less handwork.

Dimensions and Product Specifications for the DOC9030

Here are the key product details for quick purchasing and field reference:

• Product Identification: Designated under product code DOC9030 for clean, accurate inventory tracking.

• Angle Clip Material: Formed from durable mild carbon steel to resist cracking or warping under continuous tension.

• High-Grade Fastener Pin: Uses Grade 1060 to 1065 steel that complies with ASTM A510 quality standards.

• Protective Silver Zinc Finish: Coated in silver zinc plating to help defend the hardware against everyday indoor wear and rust.

• Clip Structural Profiling: Measures 1-1/4” long by 3/4” wide by 3/4” high, stamped from 14-gauge steel.

• Precision Pin Sizing: Features a fixed pin length of 1-1/16” with a 0.157” shank diameter for a strong bite into concrete or steel.

• Pre-Punched Tool Opening: Features a 1/4” hole designed to accept 12-gauge ceiling wire or a variety of secondary fasteners.

• Staging Quantity: Available in compact boxes of 100 units for clean distribution to installation crews across the floor.

Common Ways to Use the DOC9030 90° Angle Clip on the Job

This product is a practical choice for everyday interior fastening tasks. Contractors commonly use this 90° angle clip to hang 12-gauge ceiling wire for drop ceiling systems, establish fast tie-off points under concrete, and support secondary Doc’s fasteners where the layout calls for a clean overhead connection.

It can also support organized ceiling runs where different fastening methods meet in the same space. On commercial jobs, installers may combine this clip with purlin clips in steel framing areas, j-hooks for low-voltage pathways, and other hardware for overhead drilling and anchoring where direct fastening is required. For higher or harder-to-reach attachment points, extension poles can help crews work efficiently while reducing repeated ladder movement.

Advantages of Using the DOC9030 Pre-Assembled Assembly

This 90° angle clip gives crews several practical field advantages:

• The pre-assembled pin and clip layout eliminates loose parts and improves field installation speed.

• The Grade 1060 to 1065 steel pin provides a dependable hold into hard concrete or structural metal decks.

• The formed 14-gauge mild carbon steel clip carries standard wire loops without flexing out of alignment.

• The compact 100-piece box count reduces material clutter and keeps tool bags and staging areas organized.

Get All Your Installation Supplies under One Roof with Hook and Hanger

Ordering this pre-assembled clip with the rest of your installation hardware helps simplify purchasing. Instead of sourcing small fastening parts from multiple suppliers, your crew can keep key overhead components in one place. Hook and Hanger offers a practical selection for ceiling, utility, and structural attachment work, helping contractors reduce paperwork, avoid shipping delays, and keep crews supplied.

For related installation needs, our hardware line includes eye lag screws for wood or light-duty overhead connections, angle clips for directional wire and bracing support, beam clamps for structural steel attachment points, and threaded rod fasteners for hanging rod-based systems. That makes it easier to match the 90° angle clip with the hardware your project already requires.

Get Your DOC9030 90° Angle Clip Supply Directly From Hook and Hanger

Hook and Hanger supplies tough, reliable hardware for real, everyday jobsites. Choosing the exact sizing and dependable, tool-ready design of this pre-assembled 90-degree pin and clip assembly gives your crew a fast, hassle-free installation option backed by a supplier that understands the trade and focuses on helping your crew succeed.

To purchase your DOC9030 inventory or to explore our complete selection of Angle Clips, Beam Clamps, and Threaded Rod Fasteners, visit hookandhanger.com today. For technical support, bulk pricing tiers, or submittal documentation, call our specialist team at 805-583-9920 or email info@hookandhanger.com.